Main.EllansProject History
Hide minor edits - Show changes to markup
February 16, 2010, at 12:17 PM
by
- Added line 3:
http://newtextiles.media.mit.edu/uploads/Main/espero_softcircuit
February 16, 2010, at 12:17 PM
by
- Deleted line 2:
February 16, 2010, at 12:16 PM
by
- Changed line 3 from:
to:
February 16, 2010, at 12:10 PM
by
- Added line 3:
February 15, 2010, at 05:13 PM
by
- soft circuit project 1Changed lines 1-2 from:
Since I have little experience with circuits, I wanted to start with something relatively simple. I am especially interested in the design possibilities that are opened by the array of conductive materials that we have seen so far. I wanted to make something very light that doesn’t look overtly technical and could possibly be incorporated into dancewear or jewelry. \\-> The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
to:
Since I have little experience with circuits, I wanted to start with something relatively simple. I am especially interested in the design possibilities that are opened by the array of conductive materials that we have seen so far. I wanted to make something very light that doesn’t look overtly technical and could possibly be incorporated into dancewear or jewelry.
-> The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
-> The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
February 15, 2010, at 05:13 PM
by
- Changed lines 1-2 from:
Since I have little experience with circuits, I wanted to start with something relatively simple. I am especially interested in the design possibilities that are opened by the array of conductive materials that we have seen so far. I wanted to make something very light that doesn’t look overtly technical and could possibly be incorporated into dancewear or jewelry.
The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
to:
Since I have little experience with circuits, I wanted to start with something relatively simple. I am especially interested in the design possibilities that are opened by the array of conductive materials that we have seen so far. I wanted to make something very light that doesn’t look overtly technical and could possibly be incorporated into dancewear or jewelry. \\-> The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
February 15, 2010, at 05:12 PM
by
- Changed lines 1-2 from:
Since I have little experience with circuits, I wanted to start with something relatively simple. I am especially interested in the design possibilities that are opened by the array of conductive materials that we have seen so far. I wanted to make something very light that doesn’t look overtly technical and could possibly be incorporated into dancewear or jewelry.
->The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
->The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
to:
Since I have little experience with circuits, I wanted to start with something relatively simple. I am especially interested in the design possibilities that are opened by the array of conductive materials that we have seen so far. I wanted to make something very light that doesn’t look overtly technical and could possibly be incorporated into dancewear or jewelry.
The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
February 15, 2010, at 05:12 PM
by
- Changed line 2 from:
The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
to:
The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
February 15, 2010, at 05:11 PM
by
- Added lines 1-2:
Since I have little experience with circuits, I wanted to start with something relatively simple. I am especially interested in the design possibilities that are opened by the array of conductive materials that we have seen so far. I wanted to make something very light that doesn’t look overtly technical and could possibly be incorporated into dancewear or jewelry.
-> The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.
-> The materials that I chose were the conductive thread and the iron-on adhesive conductive fabric on a net substrate. The switch is a dangling metal bead, which completes the circuit by contacting the conductive fabric. The thread is connected by being sandwiched between two pieces of fabric that are fused together. The thread ends are not connected permanently to the battery module so that this element may be added into a larger grouping later.