Main.MadeleinesHappyBirdProject History

Hide minor edits - Show changes to markup

February 17, 2010, at 12:55 PM by 18.111.2.78 -
Changed lines 16-28 from:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg | preliminary sketch

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - sewn together!

http://newtextiles.media.mit.edu/uploads/Main/bird3.jpg | the bird - on the back, showing circuit and backside of embroidering

http://newtextiles.media.mit.edu/uploads/Main/bird4.jpg | the bird - from the side

http://newtextiles.media.mit.edu/uploads/Main/bird5.jpg | when the bird's "feathers" are stroked, the leds on the branch light up!

to:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg | preliminary sketch

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - sewn together!

http://newtextiles.media.mit.edu/uploads/Main/bird3.jpg | the bird - on the back, showing circuit and backside of embroidering

http://newtextiles.media.mit.edu/uploads/Main/bird4.jpg | 'the bird - from the side

http://newtextiles.media.mit.edu/uploads/Main/bird5.jpg | when the bird's "feathers" are stroked, the leds on the branch light up!

February 17, 2010, at 12:53 PM by 18.111.2.78 -
Changed lines 2-4 from:

'- For our first assignment, I created a simple circuit with 3 LED outputs and one sensor, a stroke sensor. My intention was to make a soft bird, with multiple textures, that when stroked, would have LEDs light up. -'

to:

For our first assignment, I created a simple circuit with 3 LED outputs and one sensor, a stroke sensor. My intention was to make a soft bird, with multiple textures, that when stroked, would have LEDs light up.

Changed lines 16-28 from:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg | preliminary sketch

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - sewn together!

http://newtextiles.media.mit.edu/uploads/Main/bird3.jpg | the bird - on the back, showing circuit and backside of embroidering

http://newtextiles.media.mit.edu/uploads/Main/bird4.jpg | the bird - from the side

http://newtextiles.media.mit.edu/uploads/Main/bird5.jpg | when the bird's "feathers" are stroked, the leds on the branch light up!

to:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg | preliminary sketch

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - sewn together!

http://newtextiles.media.mit.edu/uploads/Main/bird3.jpg | the bird - on the back, showing circuit and backside of embroidering

http://newtextiles.media.mit.edu/uploads/Main/bird4.jpg | the bird - from the side

http://newtextiles.media.mit.edu/uploads/Main/bird5.jpg | when the bird's "feathers" are stroked, the leds on the branch light up!

February 17, 2010, at 12:52 PM by 18.111.2.78 -
Changed lines 1-2 from:

Project Description

to:

Project Description '-

Changed lines 4-13 from:

Materials

Conductive thread, conductive fabric, 3 LEDs, 3V battery, battery holder, feathers, embroidery thread, mesh fabric

Goals and Lessons Learned

To begin, it was important for me to sketch out the path of the circuit. Since I have no experience with electronics, it was vital that I understand what needed to be connected before actually beginning to sew. This sketching out worked well. However, I would have been better served to also sketch out the exact placement and direction of the thread and its connections. As it is, the backside, where the circuit is sewn, is very messy. This leads to confusion in understanding how the circuit works, from outside perspective, as well as inconsistency in function. The sensor sometimes does not work, and think this is because sometimes the threads on the back are touching, interfering with the current.

Images

to:

-' Materials

Conductive thread, conductive fabric, 3 LEDs, 3V battery, battery holder, feathers, embroidery thread, mesh fabric

Goals and Lessons Learned

To begin, it was important for me to sketch out the path of the circuit. Since I have no experience with electronics, it was vital that I understand what needed to be connected before actually beginning to sew. This sketching out worked well. However, I would have been better served to also sketch out the exact placement and direction of the thread and its connections. As it is, the backside, where the circuit is sewn, is very messy. This leads to confusion in understanding how the circuit works, from outside perspective, as well as inconsistency in function. The sensor sometimes does not work, and think this is because sometimes the threads on the back are touching, interfering with the current.

Images

February 17, 2010, at 12:50 PM by 18.111.2.78 -
Changed lines 3-4 from:

For our first assignment, I created a simple circuit with 3 LED outputs and one sensor, a stroke sensor.

to:

For our first assignment, I created a simple circuit with 3 LED outputs and one sensor, a stroke sensor. My intention was to make a soft bird, with multiple textures, that when stroked, would have LEDs light up.

Materials

Conductive thread, conductive fabric, 3 LEDs, 3V battery, battery holder, feathers, embroidery thread, mesh fabric

Added lines 11-12:

To begin, it was important for me to sketch out the path of the circuit. Since I have no experience with electronics, it was vital that I understand what needed to be connected before actually beginning to sew. This sketching out worked well. However, I would have been better served to also sketch out the exact placement and direction of the thread and its connections. As it is, the backside, where the circuit is sewn, is very messy. This leads to confusion in understanding how the circuit works, from outside perspective, as well as inconsistency in function. The sensor sometimes does not work, and think this is because sometimes the threads on the back are touching, interfering with the current.

Added line 17:
Added line 20:
Added line 23:
Added line 26:
Added lines 29-30:
February 17, 2010, at 12:45 PM by 18.111.2.78 -
Changed lines 13-15 from:

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - on the back, showing circuit and backside of embroidering

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - from the side

to:

http://newtextiles.media.mit.edu/uploads/Main/bird3.jpg | the bird - on the back, showing circuit and backside of embroidering

http://newtextiles.media.mit.edu/uploads/Main/bird4.jpg | the bird - from the side

February 17, 2010, at 12:44 PM by 18.111.2.78 -
Changed lines 13-17 from:

http://newtextiles.media.mit.edu/uploads/Main/bird3

http://newtextiles.media.mit.edu/uploads/Main/bird4

http://newtextiles.media.mit.edu/uploads/Main/bird5

to:

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - on the back, showing circuit and backside of embroidering

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - from the side

http://newtextiles.media.mit.edu/uploads/Main/bird5.jpg | when the bird's "feathers" are stroked, the leds on the branch light up!

February 17, 2010, at 12:42 PM by 18.111.2.78 -
Changed line 11 from:
to:

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg | the bird - sewn together!

February 17, 2010, at 12:41 PM by 18.111.2.78 -
Changed line 11 from:

attach:bird2.jpg

to:
February 17, 2010, at 12:41 PM by 18.111.2.78 -
Changed line 11 from:

attach:

to:

attach:bird2.jpg

February 17, 2010, at 12:40 PM by 18.111.2.78 -
Changed line 11 from:

http://newtextiles.media.mit.edu/uploads/Main/bird2

to:

attach:

February 17, 2010, at 12:40 PM by 18.111.2.78 -
February 17, 2010, at 12:39 PM by 18.111.2.78 -
Changed lines 11-17 from:

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg

http://newtextiles.media.mit.edu/uploads/Main/bird3.jpg

http://newtextiles.media.mit.edu/uploads/Main/bird4.jpg

http://newtextiles.media.mit.edu/uploads/Main/bird5.jpg

to:

http://newtextiles.media.mit.edu/uploads/Main/bird2

http://newtextiles.media.mit.edu/uploads/Main/bird3

http://newtextiles.media.mit.edu/uploads/Main/bird4

http://newtextiles.media.mit.edu/uploads/Main/bird5

February 17, 2010, at 12:39 PM by 18.111.2.78 -
Changed line 9 from:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg

to:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg | preliminary sketch

February 17, 2010, at 12:37 PM by 18.111.2.78 -
Changed lines 11-17 from:
to:

http://newtextiles.media.mit.edu/uploads/Main/bird2.jpg

http://newtextiles.media.mit.edu/uploads/Main/bird3.jpg

http://newtextiles.media.mit.edu/uploads/Main/bird4.jpg

http://newtextiles.media.mit.edu/uploads/Main/bird5.jpg

February 17, 2010, at 12:37 PM by 18.111.2.78 -
Changed line 9 from:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg

to:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg

February 17, 2010, at 12:36 PM by 18.111.2.78 -
Changed line 9 from:
to:

http://newtextiles.media.mit.edu/uploads/Main/bird1.jpg

February 17, 2010, at 12:35 PM by 18.111.2.78 -
Changed lines 11-17 from:
to:
February 17, 2010, at 12:34 PM by 18.111.2.78 -
Changed lines 9-12 from:
to:
February 17, 2010, at 12:24 PM by 18.143.1.38 -
Changed line 9 from:
to:
February 17, 2010, at 12:22 PM by 18.143.1.38 -
Added lines 8-12:
February 16, 2010, at 08:42 PM by 151.204.251.137 -
Changed line 9 from:

Back to projects!

to:

Back to projects --> Go!

February 16, 2010, at 08:40 PM by 151.204.251.137 -
Added line 9:

Back to projects!

February 16, 2010, at 08:39 PM by 151.204.251.137 -
Added lines 1-9:

Project Description

For our first assignment, I created a simple circuit with 3 LED outputs and one sensor, a stroke sensor.

Goals and Lessons Learned

Images